[cisco-voip] CM v9 limiting call duration

[khaled Saholy]

Thank you Wes for your input.

I'll look into TCl scripting or SIP normalization scripting and see if I can find something.

Regards.

Khaled

From: wsisk at cisco.com
To: khaled_saholy at hotmail.com
CC: mcollins at block.co.uk; cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] CM v9 limiting call duration
Date: Tue, 7 Jan 2014 20:45:09 +0000







Nothing that granular in UCM AFAIK. Perhaps a TCL script on CUBE or H.323/MGCP GW?



There *might* be something possible in the new SIP normalization scripting, not sure.



-Wes




On Jan 7, 2014, at 8:34 AM, khaled Saholy <khaled_saholy at hotmail.com> wrote:




Hi Matthew,



Thanks for your reply.



If it's a service parameter, it'll be applied to all outgoing calls and not on a specific route pattern. Is that right? 



Have you or any one seen or tried a solution like this?



I'm looking for limiting duration of some calls.



Regards.



Khaled 













From: mcollins at block.co.uk

To: khaled_saholy at hotmail.com; cisco-voip at puck.nether.net

Subject: RE: [cisco-voip] CM v9 limiting call duration

Date: Tue, 7 Jan 2014 13:20:05 +0000




Hi Khaled ,
 
Under service parameters, This is taken from v8 but I’m sure it was in version 5 and above
 




Maximum Call Duration Timer: <image001.gif>


This parameter specifies the minutes that a call can remain active before Cisco CallManager clears it. A value of zero disables the timer.




 


This is a required field.




 


Default:  720




 


Minimum:  0




 


Maximum:  35791




 


Unit: min




 
 

Regards
 
Matthew
 

 


From: cisco-voip
 [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of khaled Saholy

Sent: 07 January 2014 13:05

To: cisco-voip voyp list

Subject: [cisco-voip] CM v9 limiting call duration


 

Hi All,



I just have a request from our customer about a feature exists in Legacy PABX which is limiting call duration to a PSTN destination (for example, mobile calls) to a specified time like 30 minutes or more or less according to the customer needs.



I haven't come to a solution in CM 7 or 8 but if there's any idea about it in these versions or the latest 9.x , I'll be thankful for that.



Waiting for your inputs.



Thanks and Regards.



Khaled Al-Saholy




_______________________________________________

cisco-voip mailing list

cisco-voip at puck.nether.net

https://puck.nether.net/mailman/listinfo/cisco-voip




 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20140108/cebb3e91/attachment.html>