[cisco-voip] CM v9 limiting call duration

[Heim, Dennis]

I wonder if this is something the CURRI/Routing Rules API would support.

Dennis Heim | Solution Architect (Collaboration)
World Wide Technology, Inc. | 314-212-1814

PS Engineering:  Innovate & Ignite.


From: cisco-voip [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of khaled Saholy
Sent: Wednesday, January 08, 2014 12:37 AM
To: Wes Sisk (wsisk)
Cc: cisco-voip voyp list; Matthew Collins
Subject: Re: [cisco-voip] CM v9 limiting call duration

Thank you Wes for your input.

I'll look into TCl scripting or SIP normalization scripting and see if I can find something.

Regards.

Khaled
________________________________
From: wsisk at cisco.com<mailto:wsisk at cisco.com>
To: khaled_saholy at hotmail.com<mailto:khaled_saholy at hotmail.com>
CC: mcollins at block.co.uk<mailto:mcollins at block.co.uk>; cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>
Subject: Re: [cisco-voip] CM v9 limiting call duration
Date: Tue, 7 Jan 2014 20:45:09 +0000

Nothing that granular in UCM AFAIK. Perhaps a TCL script on CUBE or H.323/MGCP GW?

There *might* be something possible in the new SIP normalization scripting, not sure.

-Wes

On Jan 7, 2014, at 8:34 AM, khaled Saholy <khaled_saholy at hotmail.com<mailto:khaled_saholy at hotmail.com>> wrote:


Hi Matthew,

Thanks for your reply.

If it's a service parameter, it'll be applied to all outgoing calls and not on a specific route pattern. Is that right?

Have you or any one seen or tried a solution like this?

I'm looking for limiting duration of some calls.

Regards.

Khaled




________________________________
From: mcollins at block.co.uk<mailto:mcollins at block.co.uk>
To: khaled_saholy at hotmail.com<mailto:khaled_saholy at hotmail.com>; cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>
Subject: RE: [cisco-voip] CM v9 limiting call duration
Date: Tue, 7 Jan 2014 13:20:05 +0000
Hi Khaled ,

Under service parameters, This is taken from v8 but I'm sure it was in version 5 and above

Maximum Call Duration Timer: <image001.gif>

This parameter specifies the minutes that a call can remain active before Cisco CallManager clears it. A value of zero disables the timer.



This is a required field.



Default:  720



Minimum:  0



Maximum:  35791



Unit: min



Regards

Matthew


From: cisco-voip [mailto:cisco-voip-bounces at puck.nether.net<mailto:voip-bounces at puck.nether.net>] On Behalf Of khaled Saholy
Sent: 07 January 2014 13:05
To: cisco-voip voyp list
Subject: [cisco-voip] CM v9 limiting call duration

Hi All,

I just have a request from our customer about a feature exists in Legacy PABX which is limiting call duration to a PSTN destination (for example, mobile calls) to a specified time like 30 minutes or more or less according to the customer needs.

I haven't come to a solution in CM 7 or 8 but if there's any idea about it in these versions or the latest 9.x , I'll be thankful for that.

Waiting for your inputs.

Thanks and Regards.

Khaled Al-Saholy
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>
https://puck.nether.net/mailman/listinfo/cisco-voip

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20140108/749b10bb/attachment.html>