[cisco-voip] DSP Issue?

[costas georgiou]

Hi All,

 

I have a call come through stating that incoming calls are ok, no outgoing calls and no internal calls.

 

They are using BRI

the device is a cisco 2901

IOS 152-3.T2

 

I had a look at the logs and this is what I found.  ANyone come across this before?

 

Cause i = 0x80AA - Switching equipment congestion
Jan 27 11:01:47.445: %DSPRM-5-UPDOWN: DSP 1 in slot 0, changed state to up
Jan 27 11:01:56.565: %DSPRM-2-DSPALARM: Received alarm indication from dsp (0/1). Resetting the DSP.
Jan 27 11:01:56.565: %DSPRM-3-DSPALARMINFO: 0042 0000 0080 0000 0000 0000 4368 6563 6B73 756D 2046 6169 6C75 7265 3A63 3030 6335 3066 302C 3030 3030 3030 3064 2C64 3031 3535 6130 302C 6430 3063 3436 6430 0000 0315 0000 0000 0000
Jan 27 11:01:56.565: %DSPRM-3-DSPALARMINFO: Checksum Failure:c00c50f0,0000000d,d0155a00,d00c46d0
Jan 27 11:02:17.277: ISDN BR0/0/0 Q931: Ux_DLRelInd: DL_REL_IND received from L2
Jan 27 11:02:18.897: %MARS_NETCLK-3-CLK_TRANS: Network clock source transitioned from priority 1 to priority 10
Jan 27 11:02:18.897: ISDN BR0/0/0 Q931: L3_ShutDown: Shutting down ISDN Layer 3
Jan 27 11:02:20.333: %DSPRM-5-UPDOWN: DSP 1 in slot 0, changed state to up
Jan 27 11:02:21.561: %MARS_NETCLK-3-CLK_TRANS: Network clock source transitioned from priority 10 to priority 1
Jan 27 11:02:29.453: %DSPRM-2-DSPALARM: Received alarm indication from dsp (0/1). Resetting the DSP.
Jan 27 11:02:29.453: %DSPRM-3-DSPALARMINFO: 0042 0000 0080 0000 0000 0000 4368 6563 6B73 756D 2046 6169 6C75 7265 3A63 3030 6335 3066 302C 3030 3030 3030 3064 2C64 3031 3535 6130 302C 6430 3063 3436 6430 0000 0315 0000 0000 0000
Jan 27 11:02:29.453: %DSPRM-3-DSPALARMINFO: Checksum Failure:c00c50f0,0000000d,d0155a00,d00c46d0
Jan 27 11:02:31.197: ISDN BR0/0/0 Q931: RX <- SETUP pd = 8  callref = 0x01
 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20140127/f1a219c1/attachment.html>