[cisco-voip] Unity Connection 10.0 / SAML

[Matthew Loraditch]

Just saw on my calendar that there is a VoE on all of the new SSO stuff in 10.0 today.
If you or anyone else interested is a partner, check it out!

Matthew G. Loraditch - CCVP, CCNA, CCDA

1965 Greenspring Drive
Timonium, MD 21093

direct voice. 443.541.1518
fax.  410.252.9284

Twitter  |  Facebook  | Website  |  Email Support

________________________________________
From: cisco-voip [cisco-voip-bounces at puck.nether.net] on behalf of Matthew Loraditch [MLoraditch at heliontechnologies.com]
Sent: Monday, January 27, 2014 2:10 PM
To: Robert Kulagowski; Cisco VOIP
Subject: Re: [cisco-voip] Unity Connection 10.0 / SAML

It won't be on CCO until the first post 10.x release comes out. It FCS's in the past month or so and stuff is showing up on PUT but isn't all there.
Upgrade is a refresh upgrade from any release b/c of switch to x64 Red Hat. Otherwise upgrade process is like in the past.

Haven't done anything with SSO yet, but it is supposed to be improved. I have seen some guides and I do believe you can federate w/o OpenAM now using ADFS.

Matthew G. Loraditch - CCNP-Voice, CCNA-R&S, CCDA
1965 Greenspring Drive
Timonium, MD 21093

direct voice. 443.541.1518
fax.  410.252.9284

Twitter  |  Facebook  | Website  |  Email Support
Support Phone. 410.252.8830


-----Original Message-----
From: cisco-voip [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Robert Kulagowski
Sent: Monday, January 27, 2014 12:47 PM
To: Cisco VOIP
Subject: [cisco-voip] Unity Connection 10.0 / SAML

Single Sign On in Unity Connection prior to 10.0 looks like it was designed to ensure that everyone just ran Exchange for voicemail. It looks like 10.0 might make this better, but all I'm finding for 10.0 on Cisco.com are Locale Installers.

Is 10.0 out yet? All the docs say October 2013, but I'm not seeing an .iso, but that's not surprising. What are the upgrade steps? Will there be a bootable .iso for direct installation, or will you need to bounce through 8.6 or 9.1 on the way to 10?

If it's out and I just don't have the right contract in place yet, has anyone done single sign-on with Unity Connections 10.0 against Active Directory? Does it still require OpenAM?

Thanks
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip