[cisco-voip] jump upgrade "license disabling" step...

Ryan Ratliff (rratliff) rratliff at cisco.com
Fri Jan 31 15:07:31 EST 2014


I'm not certain for sure if that part of the code is only executed on virtualized installs or not.  I'd test on a spare server just to be sure.

-Ryan

On Jan 31, 2014, at 2:33 PM, Lelio Fulgenzi <lelio at uoguelph.ca<mailto:lelio at uoguelph.ca>> wrote:


I'm performing a "modified" jump upgrade from v7 to v9, in so much as that we are using physical hardware as the target, not VMs. I asked this a couple of times during webinars and our account team, and there were no red flags raised.

I just want to be sure that the "licensing disabling" step, the step that allows me to reinstall v7 on the servers and upgrade them without having to rehost, is covered by installing the refresh upgrade (RU) COP file.

I'm going to re-read the jump upgrade document again in more detail, but from the few times I have read it, there was no mention of any other software to disable the licensing.

Lelio

---
Lelio Fulgenzi, B.A.
Senior Analyst, Network Infrastructure
Computing and Communications Services (CCS)
University of Guelph

519‐824‐4120 Ext 56354
lelio at uoguelph.ca<mailto:lelio at uoguelph.ca>
www.uoguelph.ca/ccs
Room 037, Animal Science and Nutrition Building
Guelph, Ontario, N1G 2W1

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>
https://puck.nether.net/mailman/listinfo/cisco-voip

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20140131/e96d8ae6/attachment.html>


More information about the cisco-voip mailing list