[cisco-voip] jump upgrade "license disabling" step...

[Ed Leatherman]

Lelio,

I'm sure this goes without saying, but make sure you have the latest
version of the COP file. I was running into a bug with licensing on an
older version, newer one resolved the bug.

Ed


On Fri, Jan 31, 2014 at 2:33 PM, Lelio Fulgenzi <lelio at uoguelph.ca> wrote:

>
> I'm performing a "modified" jump upgrade from v7 to v9, in so much as that
> we are using physical hardware as the target, not VMs. I asked this a
> couple of times during webinars and our account team, and there were no red
> flags raised.
>
> I just want to be sure that the "licensing disabling" step, the step that
> allows me to reinstall v7 on the servers and upgrade them without having to
> rehost, is covered by installing the refresh upgrade (RU) COP file.
>
> I'm going to re-read the jump upgrade document again in more detail, but
> from the few times I have read it, there was no mention of any other
> software to disable the licensing.
>
> Lelio
>
> ---
> Lelio Fulgenzi, B.A.
> Senior Analyst, Network Infrastructure
> Computing and Communications Services (CCS)
> University of Guelph
>
> 519‐824‐4120 Ext 56354
> lelio at uoguelph.ca
> www.uoguelph.ca/ccs
> Room 037, Animal Science and Nutrition Building
> Guelph, Ontario, N1G 2W1
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>


-- 
Ed Leatherman
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20140131/ca2578e4/attachment.html>