[cisco-voip] Cisco MWI on IPC Unigy dealer boards

[Ryan Ratliff (rratliff)]

You may need qsig tunneling over the sip trunk to get MWI working with the sccp unity integration.  I bet you will have better luck doing sip to unity so UCM can direct the unsolicited notify out to unigy directly.

Sent from my iPhone

On Jul 17, 2014, at 6:00 AM, "Matthew Collins" <matthewjcollins at btopenworld.com<mailto:matthewjcollins at btopenworld.com>> wrote:

Hi All,

Hope one of you will be able to help or point me in the right direction.

CUCM and CUC are both 9.1.1,

CUCM to CUC is SCCP

CUCM to IPC Unigy is SIP

Dial plan on CUCM is E164

Dial Plan on Unigy is 4 digits

CUC account has the Unigy 4 digit extension set as a alternate MWI

I have created a specific 4 digit route pattern pointing to the IPC unigy sip trunk

If I dial the MWI on and off numbers from the dealer board I can see them hit the CUCM but get NU played back from the dealer board

Sip trunk from IPC Unigy has the CUC partition in its CSS

The Unity ports CSS have access to the 4 digit route pattern pointing to the IPC unigy.

Thanks

Matthew
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>
https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20140717/defabd0a/attachment.html>