[cisco-voip] Cisco MWI on IPC Unigy dealer boards

Matthew Collins matthewjcollins at btopenworld.com
Thu Jul 17 05:51:30 EDT 2014

Hi All,

Hope one of you will be able to help or point me in the right direction.

CUCM and CUC are both 9.1.1,


CUCM to IPC Unigy is SIP
Dial plan on CUCM is E164

Dial Plan on Unigy is 4 digits

CUC account has the Unigy 4 digit extension set as a alternate MWI

I have created a specific 4 digit route pattern pointing to the IPC unigy sip trunk

If I dial the MWI on and off numbers from the dealer board I can see them hit the CUCM but get NU played back from the dealer board

Sip trunk from IPC Unigy has the CUC partition in its CSS

The Unity ports CSS have access to the 4 digit route pattern pointing to the IPC unigy.


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20140717/fba25e8d/attachment.html>

More information about the cisco-voip mailing list