[cisco-voip] Copying CME Files/ios between Gateways

Bernhard Albler bernhard.albler at gmail.com
Sun Jul 20 12:40:15 EDT 2014


Recently had to do it
Option 1 as already pointed out: Card Reader and a Notebook
Option 2 which i had to use: use the tar command to tar everything on the
flash card of Router A, then untar on router B.
Either use a USB key or if enough space is available you could also tar to
the local flash and then copy via tftp or http


On Sat, Jul 19, 2014 at 9:13 AM, Dave Hayes <boyzie30 at hotmail.com> wrote:

> Hi All
>
> As the title states is there any way that the full CME files can be copied
> between Gateways in one hit?
>
> Having to replace hardware so need copy the complete setup and
> unfortunately the original Gateway has no support so can't download from
> Cisco (entitlement required)
>
> CME version is 9.1
> Ios version
> c2951-universalk9-mz.SPA.152-4.M3.1
> ISR c2951
>
> Any assistance greatly appreciated.
>
> Thanks
>
> Dave
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>


-- 
Bernhard Albler, +4369917207384
--
"Was Nachwelt! Wie komm' ich dazu was für die Nachwelt zu tun? Was hat denn
die Nachwelt für mich getan?"
--Carl Friedrich Zelter
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20140720/c9170146/attachment.html>


More information about the cisco-voip mailing list