[cisco-voip] Copying CME Files/ios between Gateways

[Peter Slow]

hey boys and girls...

tftp-server command from global config mode ;) (plus that tar thing
someone just said. i havent MADE an archive on a router before. "dir
flash" + sed in lieu of that ability though.)

http://www.cisco.com/c/en/us/td/docs/ios/fundamentals/command/reference/cf_book/cf_t1.html#wp1019519

This tip should not be construed as an endorsement for not paying for
an appropriate service contract =)

-Peter Slow

On Sun, Jul 20, 2014 at 12:40 PM, Bernhard Albler
<bernhard.albler at gmail.com> wrote:
> Recently had to do it
> Option 1 as already pointed out: Card Reader and a Notebook
> Option 2 which i had to use: use the tar command to tar everything on the
> flash card of Router A, then untar on router B.
> Either use a USB key or if enough space is available you could also tar to
> the local flash and then copy via tftp or http
>
>
> On Sat, Jul 19, 2014 at 9:13 AM, Dave Hayes <boyzie30 at hotmail.com> wrote:
>>
>> Hi All
>>
>> As the title states is there any way that the full CME files can be copied
>> between Gateways in one hit?
>>
>> Having to replace hardware so need copy the complete setup and
>> unfortunately the original Gateway has no support so can't download from
>> Cisco (entitlement required)
>>
>> CME version is 9.1
>> Ios version
>> c2951-universalk9-mz.SPA.152-4.M3.1
>> ISR c2951
>>
>> Any assistance greatly appreciated.
>>
>> Thanks
>>
>> Dave
>>
>> _______________________________________________
>> cisco-voip mailing list
>> cisco-voip at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>
>
>
>
> --
> Bernhard Albler, +4369917207384
> --
> "Was Nachwelt! Wie komm' ich dazu was für die Nachwelt zu tun? Was hat denn
> die Nachwelt für mich getan?"
> --Carl Friedrich Zelter
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>