[cisco-voip] NTP not set on Unity Connection subscriber/HA server - 9.1.2.11900-12

[MManly at TEP.com]

I'm working on 8.6 currently, but I suspect that the following still applies in 9.x

https://supportforums.cisco.com/discussion/11669586/changing-ntp-call-manager-86

Make the change only on the Pub, wait up to 5 minutes to synch.  Refresh, then reboot subsequent nodes in the cluster.

That's the short version of the full rundown.

Mary

-----Original Message-----
From: cisco-voip [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Erick Bergquist
Sent: Thursday, July 31, 2014 12:02 PM
To: voip puck
Subject: [cisco-voip] NTP not set on Unity Connection subscriber/HA server - 9.1.2.11900-12

Does anyone know of a way to correct the NTP setting on a subscriber server without either getting TAC to correct it with root access or re-installing?

'utils ntp status' reports no NTP servers set and I can't add servers because it is a subscriber node.

admin:utils ntp server add 10.10.10.100
10.10..10.100 : [The requested action is not permitted on a subsequent node (Subscriber).]

CUC version 9.1.2.11900-12
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip