[cisco-voip] Low Mic Volume

[David Zhars]

They are using it on Speakerphone, and yes, when I use it, it's the same
way.  You can hear me better through the walls than you can over the mic to
the receiving phone!

I will try a new phone.


On Mon, Jun 2, 2014 at 12:44 PM, Norton, Mike <mikenorton at pwsd76.ab.ca>
wrote:

>  IIRC, the 7942 has a setting for wideband handset. Maybe this is set to
> something that doesn’t match the handset that’s actually connected?
>
>
>
> -mn
>
>
>
> *From:* cisco-voip [mailto:cisco-voip-bounces at puck.nether.net] *On Behalf
> Of *David Zhars
> *Sent:* June-02-14 6:59 AM
> *To:* cisco-voip at puck.nether.net
> *Subject:* [cisco-voip] Low Mic Volume
>
>
>
> Is there any reason, other than a defective phone, that a new 7942 when
> used in initiating a conference call, we can barely hear that person
> talking?  It's almost as if the voume for the mic is way down, or barely
> working.  I have checked their phone, nothing blocking the mic area.  Just
> wondering is there is some sort of setting I should be aware of or if I
> should replace the phone.
>
> Thanks.
>
> Dave
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20140602/b6bc6e41/attachment.html>