[cisco-voip] Auto Assign DNs to multi line phones using CME 9

[Jeffrey Girard]

All -

          This is my home lab - exploring the auto assign function

I have a simple CME configured using the auto assign function.  However, the auto assign only assigns a number to the primary line of a multi line phone.

Is there a way to get the function to assign a DN to every line on the phone (ie 7960?)

CME config below

telephony-service

 max-dn 200

 max-ephone 10

 auto-reg-ephone

 auto assign 1 to 10 type 7960

 ip source-address X.X.X.X

 create cnf-files

exit

ephone-dn 1

 number 2001

exit

ephone-dn 2

 number 2002

exit

etc, etc, etc for ephone-dns up to 10

Any ideas?
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20140606/4f71c03b/attachment.html>