[cisco-voip] Jabber 9.7 Softphone to CME 9.1 IOS 15.2 9971 no video

[Jason Aarons (AM)]

I do not.

The CUBE is flow-around.  I tested adding a video codec h264 on the CME dial-peer and that didn’t resolve it.

I’ll pull more ccm and CME traces and dig into it this week.

Does CME 9971 have RTCP enabled by default out a SIP trunk?  Does CUBE care about RTCP?

From: bmeade90 at gmail.com [mailto:bmeade90 at gmail.com] On Behalf Of Brian Meade
Sent: Monday, June 09, 2014 10:31 AM
To: Jason Aarons (AM)
Cc: cisco-voip (cisco-voip at puck.nether.net)
Subject: Re: [cisco-voip] Jabber 9.7 Softphone to CME 9.1 IOS 15.2 9971 no video


Jason,

Do you have MTP Required on the SIP Trunk?  Can you pull the CallManager traces with the SIP Stack trace enabled as well?

Thanks,
Brian

On Sun, Jun 8, 2014 at 1:23 PM, Jason Aarons (AM) <jason.aarons at dimensiondata.com<mailto:jason.aarons at dimensiondata.com>> wrote:
I can make calls Jabber sotphone/Jabber softphone with video fine.
I can make calls Jabber softphone  to same cluster CUCM 9971 with video fine.

When I make a call Jabbe Softphone call via CUCM SIP Trunk to CUBE to CME 9.1 15.2 I get no video.  Any ideas?  Is there a setting for RTCP on a sip trunk or in CME somewhere?  As I saw a similar issue on NetPro resolve that.

CUCM 9.1
CUE IOS 15.1
CME 9.1 / IOS 15.2M5
9971 SIP9.4.1.9

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>
https://puck.nether.net/mailman/listinfo/cisco-voip



itevomcid
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20140609/1d77b414/attachment.html>