[cisco-voip] 9971 as a Trader phone

[Tim Smith]

Hi guys,

You can make this permanent with “Revert to All Calls” and “Show All Calls on Primary Line”
It’s in 9.2(3)
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cuipph/9971_9951_8961/firmware/9_2_3/release_notes/9900_8900_923.html#wp239395


Cheers,

Tim

From: cisco-voip [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Adam Blomfield
Sent: Tuesday, 10 June 2014 11:56 PM
To: Mike
Cc: Cisco VOIP
Subject: Re: [cisco-voip] 9971 as a Trader phone

If all calls was selected then they could just press the call appearance button on the right to answer the call - or pick up the handset, hit the speakerphone or headset button etc. It would be just like the had the correct line appearance selected, but without having to swap between the directory numbers.
-Adam

On Tue, Jun 10, 2014 at 8:26 AM, Mike <mikeeo at msn.com<mailto:mikeeo at msn.com>> wrote:
Adam,

I did add  “All Calls” to line 3 but really didn’t understand how it would work. So the trader needs to keep “All Calls” selected and a call comes in how would they answer it without hitting 2 or 3 buttons?

From: Adam Blomfield [mailto:adman at adman.net<mailto:adman at adman.net>]
Sent: Tuesday, June 10, 2014 9:19 AM
To: Mike
Cc: Cisco VOIP
Subject: Re: [cisco-voip] 9971 as a Trader phone

If you add an "All Calls" button to the template and they keep this button selected then calls from all lines will show up mixed into the call appearance buttons on the right of the phone. The corresponding line on the left will flash so they will know if it's a call to their primary line or the shared line, but they won't have to press one of the line buttons in order to get to a ringing call. Any time I use the 8961/9900 series with multiple directory numbers I have to use the All Calls button as the users do no like swapping between lines.

-Adam

On Tue, Jun 10, 2014 at 8:13 AM, Mike <mikeeo at msn.com<mailto:mikeeo at msn.com>> wrote:
Hey all I have a group of traders that migrated from 7965’s to 9971’s. They aren’t very happy as it takes 2 or 3 button hits to answer a call that’s not on the primary line.

Has anyone seen this problem? I changed the setting  always use primary line but didn’t make a difference.

Phone config has following attributes:

Button 1: primary line
Button 2: shared line


Button 7 – 22 : PLAR to remote traders





_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>
https://puck.nether.net/mailman/listinfo/cisco-voip


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20140610/c68476e8/attachment.html>