[cisco-voip] CUBE 15.2 ?

[Jason Aarons (AM)]

Does a CUBE have to have two separate dial-peers (incoming and outgoing) for it to be a CUBE?  Or can I use a single dial-peer matching both in and out.

voice service voip
no ip address trust auth
allow-connection sip to sip
mode border-element
!
dial-peer voice 2001 voip
   destination-patter 6...$  <<<<matches out
   session proto sipv2
   session target ipv4:10.10.64.11
   voice-class codec 2
  dtmf-relay rtp-nte
  no vad
  incoming called-number   <<<< matches in



I was taught that a dial peer for CUBE must have two separate dial-peers to be a CUBE. Is that correct, or will the above "combo" dial-peer work?

IOS 15.24M4
CUCM 9.1.2




-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20140625/371d9a18/attachment.html>