[cisco-voip] Jabber to Huawei MCU

[Amit Kumar]

Hello Paulo,

Ad per logs attached,  call seems to be released by huwaie system, with an
reason of no route to destination.
On 08-May-2014 6:48 pm, "José Paulo de Oliveira Petry" <petrybr at gmail.com>
wrote:

> Hello,
>
> Im not a H323 expert, so if someone could help me finding and solving this
> problem i'll really appreciate!
>
> My costumer has IP Telephony from Cisco (CUCM, Jabber, Cisco phones...)
> and Videoconference from Huawei.
>
> As a plan to migrate their videoconference to Cisco the first step is
> interoperability so they can migrate bit by bit
>
> Im using a Cisco VCS Control to do the interworking SIP-H323, so the
> topology is this:
>
> CUCM <-SIP-> VCS <-H323-> Huawei Gatekeeper
>
> When i call from Jabber to a Huawei endpoint, everythings works fine:
>
> Jabber -> CUCM -> VCS -> Huawei GK -> Huawei Endpoint
>
> But when im calling from Jabber to Huaweii MCU it doesnt works, the call
> is answered but in less than a second it is finished
>
> Jabber -> CUCM -> VCS -> Huawei GK -> Huawei MCU
>
> I guess it is a codec mismatch, but as im not a H323 expert i cant confirm
> what is really going on and if it is really a codec mismatch.
>
> Attached is the log captured from VCS.
>
> Thanks in advance for any help!
>
> Regards,
>
> José Paulo de Oliveira Petry
> petrybr at gmail.com
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20140508/9ed84e6e/attachment.html>