[cisco-voip] Cisco Jabber and Microsoft Lync Voice channels

[Amit Kumar]

Sorry Thomas, analysis was for another thread.
On 08-May-2014 9:33 pm, "Amit Kumar" <amit3.kum at gmail.com> wrote:

> Seems that huwaie is releasing the call, with no route to destination
> Src-port="1720"
>  Received H.225 PDU:
>  Q931
>  {
>    Message Type: Release Complete
>    Call reference flag: Message sent to originating side
>    Call reference value: 0xa
>    Info Element : Cause
>    {
>      Location: Usr
>      Cause Value: No route to destination
>    }
>    Info Element : Display
>    {
>      Display Information = Huawei Technologies Co.,  Ltd.
>    }
>    Info Element : User User
>    {
>      Length = 23
>    }
>  }
>  On 08-May-2014 8:29 pm, "Thomas LeMay" <thomaslemay at comcast.net> wrote:
>
>> We are rolling out Cisco Jabber version 9.6.0 build 17088 and Microsoft
>> Lync version 4.0.7577.4419.  Some users experience a condition where both
>> Lynch and Jabber initiate the phone call and provide simultaneous audio
>> channels in stereo.  Thus, both Lync and Jabber are both providing
>> simultaneous dial tone and are handling the voice calls.  Other users do
>> not experience this issue.  Has anyone experienced this before and are
>> there any solutions?
>>
>>
>>
>> Thank you,
>>
>>
>>
>> Tom
>>
>> _______________________________________________
>> cisco-voip mailing list
>> cisco-voip at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>
>>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20140508/399b966d/attachment.html>