[cisco-voip] SIP dial rules & PLAR

[Mike]

Brian,

 

I’m a little confused. Should I do the following:

 

Desc : PLAR

Dial Parameter: Button  

Value: 3

Dial Parameter: Pattern

Value: Empty 

 

Like that?

 

And repeat for each PLAR button 3-15?

 

 

From: cisco-voip [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Brian Meade
Sent: Sunday, May 18, 2014 10:56 PM
To: Mike
Cc: Cisco VOIP
Subject: Re: [cisco-voip] SIP dial rules & PLAR

 

When you build the SIP dial rule, you need to add the button parameter to each PLAR you add.

 

On Sun, May 18, 2014 at 4:17 PM, Mike <mikeeo at msn.com> wrote:

The phone setup is as follows

 

Button 1: regular ext. calls in/out

 

Buttons 3-15 are PLARs to different agencies

 

If I apply the SIP dial rule I created PLARs work fine, but button 1 has no dial tone 

 

Remove the SIP dial rule and button 1 works fine, but PLARs no longer function.

 

Do I need to add patterns somewhere?

 

From: cisco-voip [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Anthony Holloway
Sent: Sunday, May 18, 2014 3:36 PM
To: Mike
Cc: Cisco VOIP
Subject: Re: [cisco-voip] SIP dial rules & PLAR

 

>From what you describe that sounds expected. Did you want PLAR and regular dialing on the same line? 

On Sunday, May 18, 2014, Mike <mikeeo at msn.com> wrote:

I’m deploying 9971’s for some traders and when I apply the SIP dial rule to get the PLAR to work my 1 first button extension doesn’t work, but the plar works. Do I need to redo all the route patterns in the dial rule?

 


_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20140519/13bb7a0b/attachment.html>