[cisco-voip] SIP dial rules & PLAR

[Brian Meade]

That's correct.  Then you make the separate Line CSS for each button on the
phone you want to do PLAR just how you would do PLAR for a SCCP phone.

brian


On Mon, May 19, 2014 at 9:23 AM, Mike <mikeeo at msn.com> wrote:

> Brian,
>
>
>
> I’m a little confused. Should I do the following:
>
>
>
> Desc : PLAR
>
> Dial Parameter: Button
>
> Value: 3
>
> Dial Parameter: Pattern
>
> Value: Empty
>
>
>
> Like that?
>
>
>
> And repeat for each PLAR button 3-15?
>
>
>
>
>
> *From:* cisco-voip [mailto:cisco-voip-bounces at puck.nether.net] *On Behalf
> Of *Brian Meade
> *Sent:* Sunday, May 18, 2014 10:56 PM
>
> *To:* Mike
> *Cc:* Cisco VOIP
> *Subject:* Re: [cisco-voip] SIP dial rules & PLAR
>
>
>
> When you build the SIP dial rule, you need to add the button parameter to
> each PLAR you add.
>
>
>
> On Sun, May 18, 2014 at 4:17 PM, Mike <mikeeo at msn.com> wrote:
>
> The phone setup is as follows
>
>
>
> Button 1: regular ext. calls in/out
>
>
>
> Buttons 3-15 are PLARs to different agencies
>
>
>
> If I apply the SIP dial rule I created PLARs work fine, but button 1 has
> no dial tone
>
>
>
> Remove the SIP dial rule and button 1 works fine, but PLARs no longer
> function.
>
>
>
> Do I need to add patterns somewhere?
>
>
>
> *From:* cisco-voip [mailto:cisco-voip-bounces at puck.nether.net] *On Behalf
> Of *Anthony Holloway
> *Sent:* Sunday, May 18, 2014 3:36 PM
> *To:* Mike
> *Cc:* Cisco VOIP
> *Subject:* Re: [cisco-voip] SIP dial rules & PLAR
>
>
>
> From what you describe that sounds expected. Did you want PLAR and regular
> dialing on the same line?
>
> On Sunday, May 18, 2014, Mike <mikeeo at msn.com> wrote:
>
> I’m deploying 9971’s for some traders and when I apply the SIP dial rule
> to get the PLAR to work my 1 first button extension doesn’t work, but the
> plar works. Do I need to redo all the route patterns in the dial rule?
>
>
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20140519/65875d7b/attachment.html>