[cisco-voip] CUCMBE6K RAM requirement

Thu May 29 04:52:43 EDT 2014

I opened the top cover and found that it contains the 4x UC-MR-1X082RY-A,
for some reason it was not shown in the BOQ I was given.

Thanks everyone for the support, greatly appreciated

Abebe

On Wed, May 28, 2014 at 11:41 PM, Ryan Ratliff (rratliff) <
rratliff at cisco.com> wrote:

>  The server should have come with (4) of the UC-MR-1X082RY-A part for a
> total of 32GB of RAM.
>
>  If it didn't talk to your vendor or Cisco Customer Service so the issue
> can be corrected.
>
> -Ryan
>
>  On May 28, 2014, at 10:24 AM, Abebe Amare <abucho at gmail.com> wrote:
>
>  Hi Mathew,
>
>  I will inspect the internal of the server physically to check whether it
> has 8GB or 32 GB.
>
>  Thanks for the support, much appreciated.
>
>  Abebe
>
>
> On Wed, May 28, 2014 at 4:56 PM, Matthew Loraditch <
> MLoraditch at heliontechnologies.com> wrote:
>
>>  If that is the part that is ordered all that is, is the version w/o
>> strong encryption for certain countries. You should have 32GBs of RAM. If
>> you don’t you have a problem and should be able to correct with your Disti
>> or TAC as you got a bad product.
>>
>> Have you spun up the server and it actually only shows 8GBs?
>>
>>
>>
>> <image001.jpg>
>>
>> Matthew G. Loraditch – CCNP-Voice, CCNA-R&S, CCDA
>>
>> 1965 Greenspring Drive
>> Timonium, MD 21093
>>
>> direct voice. 443.541.1518
>> fax.  410.252.9284
>>
>> Twitter <http://twitter.com/heliontech>  |  Facebook
>> <http://www.facebook.com/#!/pages/Helion/252157915296>  | Website
>> <http://www.heliontechnologies.com/>  |  Email Support
>> <support at heliontechnologies.com?subject=Technical%20Support%20Request>
>>
>> Support Phone. 410.252.8830
>>
>> <image002.png>
>>
>>
>>
>> *From:* Abebe Amare [mailto:abucho at gmail.com]
>> *Sent:* Wednesday, May 28, 2014 9:48 AM
>> *To:* Matthew Loraditch
>> *Cc:* cisco voip
>> *Subject:* Re: [cisco-voip] CUCMBE6K RAM requirement
>>
>>
>>
>> Hi Mathew,
>>
>>
>>
>> The full order is spec is as below:
>>
>> *Part Number*
>>
>> *Description*
>>
>> BE6K-ST-BDL-XU=
>>
>> Cisco BE6000 UCS C220M3 MD Srv,UNRST 9.x SW,Hyp,UPM,VCS
>>
>> LIC-VCS-10+
>>
>> Video Comm Server 10 Add Non-traversal Network Calls
>>
>> CAB-9K10A-EU
>>
>> Power Cord, 250VAC 10A CEE 7/7 Plug, EU
>>
>> BE6K-SW-APP-9.X-XU
>>
>> Cisco Business Edition 6000 SW App Version 9.X Unrestricted
>>
>> CIT-PSU-BLKP
>>
>> Power Supply Blanking Panel/Filler
>>
>> CIT-SD-16G-C220
>>
>> 16GB SD Card Module for C220 servers
>>
>> CTI-VCSC-BE6K-PAK
>>
>> Config Only E-Delivery VCS Control PAK PID
>>
>> VMW-VS5-HYP-K9
>>
>> Cisco UC Virt. Hypervisor 5.x (2-socket)
>>
>> VMW-VS5-SNS
>>
>> Cisco UC Virt. Hypervisor 5.x - SnS
>>
>> LIC-VCS-BASE
>>
>> License Key - VCS Non-encrypted Software Image
>>
>> LIC-VCS-GW
>>
>> Enable GW Feature (H323-SIP)
>>
>> LIC-VCSE-5+
>>
>> Video Communication Server - 5 Traversal Calls
>>
>> R2XX-RAID10
>>
>> Enable RAID 10 Setting
>>
>> UC-A03-D500GC3
>>
>> 500GB  6Gb SATA  7.2K RPM SFF Hot Plug/Drive Sled Mounted
>>
>> UC-CPU-E5-2609
>>
>> 2.4 GHz E5-2609/80W 4C/10MB Cache/DDR3 1066MHz
>>
>> UC-MR-1X082RY-A
>>
>> 8GB DDR3-1600-MHz RDIMM/PC3-12800/Dual Rank/1.35v
>>
>> UC-PSU-650W
>>
>> 650W Power Supply Unit For UCSC C220 Rack Server
>>
>> UC-RAID-9271
>>
>> MegaRAID 9271-8i + Battery Backup for C240 and C220
>>
>>
>>
>> It looks like the part number they ordered is different to your
>> recommendation of BE6K-ST-BDL-k9=
>>
>>
>>
>>
>>
>>
>>
>> On Wed, May 28, 2014 at 4:08 PM, Matthew Loraditch <
>> MLoraditch at heliontechnologies.com> wrote:
>>
>>  If they bought the correct BE6K server bundle it would have come with
>> the right RAM. It sounds like they got the wrong thing. I’d advise them to
>> RMA and order the BE6K-ST-BDL-K9= part as I’m guessing they purchased a
>> build to order C220 M3 and it’s not going to have come with the right
>> entitlements or base software and is not discounted the same way as the
>> bundle part.
>>
>>
>>
>>
>>
>> Matthew G. Loraditch – CCNP-Voice, CCNA-R&S, CCDA
>>
>> 1965 Greenspring Drive
>> Timonium, MD 21093
>>
>> direct voice. 443.541.1518
>> fax.  410.252.9284
>>
>> Twitter <http://twitter.com/heliontech>  |  Facebook
>> <http://www.facebook.com/#!/pages/Helion/252157915296>  | Website
>> <http://www.heliontechnologies.com/>  |  Email Support
>> <support at heliontechnologies.com?subject=Technical%20Support%20Request>
>>
>> Support Phone. 410.252.8830
>>
>>
>>
>>
>>
>> *From:* cisco-voip [mailto:cisco-voip-bounces at puck.nether.net] *On
>> Behalf Of *Abebe Amare
>> *Sent:* Wednesday, May 28, 2014 8:53 AM
>> *To:* cisco voip
>> *Subject:* [cisco-voip] CUCMBE6K RAM requirement
>>
>>
>>
>> Hi All,
>>
>>
>>
>> Customer has a single CUCMBE6K with 8GB of RAM (UCS C220M3 medisum
>> density Server).
>>
>> . They want to install on it CUCM, UC, Presence and Informacast.
>> According to the docwiki for BE6k implementation, for Medium Density
>> (MD) server, co-residency policy supports for any 4 UC applications and 1
>> Provisioning application as long as they fit in 8vCPU and 32GvRAM. Does
>> this mean they need to upgrade the RAM to 32 GB to accommodate all the
>> servers?
>>
>>
>>
>> Thanks in advance,
>>
>>
>>
>> Abebe
>>
>>
>>
>
>  _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20140529/d35aab1d/attachment.html>