[cisco-voip] UC on UCS C-Series with only two on-board 1Gbps Ports - Best Practice Network Connectivity

[Josh Warcop]

Dedicated LOM. Single vSwitch with both NICs. Etherchannel from the switch.

Sent from my Windows Phone
________________________________
From: Boon<mailto:ciscovoipuser at gmail.com>
Sent: ‎11/‎10/‎2014 6:36 AM
To: cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>
Subject: [cisco-voip] UC on UCS C-Series with only two on-board 1Gbps Ports - Best Practice Network Connectivity

Customer has ordered the 2 port C220-M3S server which is based on the BE
version. They haven't purchased the BE bundle so the server has been
shipped from Cisco with only the RAID Array setup. I need to design and
setup the NICs for both vSphere management and the virtual machine traffic.

Can anyone advise on what is best practice for this setup or how BE bundles
are configured when shipped from Cisco? Unfortunately I only have
experience of working with C-Series with the 4-port PCIe cards for which
the setup is reasonably well documented.

Thanks
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20141110/739e9c3d/attachment.html>
-------------- next part --------------
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip