[cisco-voip] UC on UCS C-Series with only two on-board 1Gbps Ports - Best Practice Network Connectivity

[Boon]

Thanks Josh, I set it up like this but wanted to double check.

On Mon, Nov 10, 2014 at 1:20 PM, Josh Warcop <josh at warcop.com> wrote:

>  Dedicated LOM. Single vSwitch with both NICs. Etherchannel from the
> switch.
>
> Sent from my Windows Phone
>  ------------------------------
> From: Boon <ciscovoipuser at gmail.com>
> Sent: ‎11/‎10/‎2014 6:36 AM
> To: cisco-voip at puck.nether.net
> Subject: [cisco-voip] UC on UCS C-Series with only two on-board 1Gbps
> Ports - Best Practice Network Connectivity
>
>  Customer has ordered the 2 port C220-M3S server which is based on the BE
> version. They haven't purchased the BE bundle so the server has been
> shipped from Cisco with only the RAID Array setup. I need to design and
> setup the NICs for both vSphere management and the virtual machine
> traffic.
>
>  Can anyone advise on what is best practice for this setup or how BE
> bundles are configured when shipped from Cisco? Unfortunately I only have
> experience of working with C-Series with the 4-port PCIe cards for which
> the setup is reasonably well documented.
>
> Thanks
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20141111/81fac0a1/attachment.html>