[cisco-voip] 7800s ip phones 8.5

[Bala Singaram]

Yes you are right.

On Mon, Oct 6, 2014 at 3:57 AM, abbas Wali <abbaseo at gmail.com> wrote:

> thanks Bala,
>
> so you have to upload/install that to all the nodes/subs and no reboot
> required. I have also just seen a cop file for it. in which case, I can
> upload the cop file to all the nodes again and restart the TFTP services??
>
> On 6 October 2014 11:49, Bala Singaram <mmailbala at gmail.com> wrote:
>
>> Hi Abbas,
>>
>> Install the pack in PUB first then other nodes [ SUB ], no need to reboot
>> the server, since the device pack will be active version itself.
>>
>> Regards,
>> Bala
>>
>> On Mon, Oct 6, 2014 at 3:31 AM, abbas Wali <abbaseo at gmail.com> wrote:
>>
>>> hi all,
>>>
>>> added new Device Pack for 7800 SIP phones on CUCM 8.5.
>>> can see the new phones appearing in the drop down list and in the device
>>> defaults.
>>> but still the phones are not registering.
>>>
>>> after the Dev Pack i restarted the TFTP services. do i need to reboot
>>> the whole cluster!!
>>>
>>> also I uploaded the Dev pack only on the TFTP node. does that needed to
>>> be on all the nodes (which i dont think so)
>>>
>>> ​thanks all.​
>>>
>>> --
>>>
>>>
>>> _______________________________________________
>>> cisco-voip mailing list
>>> cisco-voip at puck.nether.net
>>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>>
>>>
>>
>
>
> --
> *Abbas Wali*
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20141006/938c01b3/attachment.html>