[cisco-voip] Remove lines on phones with BAT

[Ryan Ratliff (rratliff)]

Auto-reg will provision lines as well, and I agree with Anthony.
I don't think anyone wants to deal with the potential issue of somebody picking up a phone to dial emergency services and not getting dialtone.

-Ryan

On Oct 29, 2014, at 2:05 PM, Anthony Holloway <avholloway+cisco-voip at gmail.com<mailto:avholloway+cisco-voip at gmail.com>> wrote:

Scott,

SIP or SCCP, either way, for emergency reasons you don't want phones laying about, unable to save a life when people depend on the reliability of 911.

Here's one option without knowing your environment design or limitations:  Setup Auto Registration and then Bulk Delete all the phones.

On Tue, Oct 28, 2014 at 1:38 PM, Ryan Ratliff (rratliff) <rratliff at cisco.com<mailto:rratliff at cisco.com>> wrote:
All phones? SIP phones won't register without a line.

-Ryan

On Oct 28, 2014, at 1:16 PM, Scott Voll <svoll.voip at gmail.com<mailto:svoll.voip at gmail.com>> wrote:

is there a way to bulk delete all lines on all phones?

we are moving to extension mobility and want to remove all the lines on all the phones

Thanks

scott

CM 8.6.2
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>
https://puck.nether.net/mailman/listinfo/cisco-voip


_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>
https://puck.nether.net/mailman/listinfo/cisco-voip


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20141029/e8284759/attachment.html>