[cisco-voip] Jabber/ Phone DND

[Leslie Meade]

I have two jabber end points with ip phones as well.

User A puts his desk phone into DND, this presence state is not showing on his or other users Jabber clients.
However if User A puts their Jabber into DND the desk phone will go into DND and since jabber was put into DND presence is shown.

I think it would have to so with shared lines and DND. If you have shared lines and place one into DND the other still ring and not show that one is in DND


From: bmeade90 at gmail.com [mailto:bmeade90 at gmail.com] On Behalf Of Brian Meade
Sent: Thursday, September 11, 2014 9:03 AM
To: Leslie Meade
Cc: cisco-voip (cisco-voip at puck.nether.net)
Subject: Re: [cisco-voip] Jabber/ Phone DND

Are you saying that a shared line on Jabber isn't changing to DND when the IP Phone goes DND?  Or User B on Jabber observing User A doesn't see User A go Busy when User A's IP Phone is set to DND?

On Thu, Sep 11, 2014 at 11:35 AM, Leslie Meade <Leslie.Meade at lvs1.com<mailto:Leslie.Meade at lvs1.com>> wrote:

Is there a reason why DND on an IP Phone does not show as DND on a jabber client ?

All other states are working except for DND

Cheers

Leslie



_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>
https://puck.nether.net/mailman/listinfo/cisco-voip

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20140911/de75c0da/attachment.html>