[cisco-voip] Door Opener Ring Delay

[Charles Goldsmith]

Sounds like it could be a t302 type timer if the valcom is working fine
with analog on it.

On Thu, Sep 18, 2014 at 7:46 AM, Steven Sarte <steven.sarte at gmail.com>
wrote:

> When trying with an analog phone, no delay.
>
> What I did notice is that when running the debug vpm signal, the door
> button is pressed their is a delay about 10-12 seconds then the IP Phone
> rings and then I start seeing the debugs.
>
> Of course Cisco and Valcom state their are no issues.
>
> On Thu, Sep 18, 2014 at 12:21 AM, Charles Goldsmith <wokka at justfamily.org>
> wrote:
>
>> Is there a delay when you plug it into an analog and take the router out
>> of the pic?  What I'm really asking, is the delay in the valcom or your
>> router/CUCM?
>>
>> On Wed, Sep 17, 2014 at 9:40 PM, Steven Sarte <steven.sarte at gmail.com>
>> wrote:
>>
>>> Anyone have experience with a Valcom 2901A door opener.  Have it working
>>> with my 2911 and CUCM with an FXO port but their is a significant delay
>>> when you press the button and when the IP Phone rings.
>>>
>>> Tried both H.323 and MGCP with no difference.
>>>
>>> Current config:
>>> voice-port 0/1/0
>>>  connection plar 8999
>>>  description Valcom V-2901A Door Opener
>>>  station-id name Door
>>>
>>> dial-peer voice 101 voip
>>>  destination-pattern 8999
>>>  session target ipv4:<CUCM IP>
>>>  voice-class codec 1
>>>  voice-class h323 1
>>>  dtmf-relay h245-alphanumeric
>>>  no vad
>>>
>>> I did try connection plar 8999 immediate (no change)
>>> als connection plar opx 8999 (no change)
>>>
>>> Thanks in advanced
>>> Steven
>>>
>>> _______________________________________________
>>> cisco-voip mailing list
>>> cisco-voip at puck.nether.net
>>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>>
>>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20140918/e33be6a0/attachment.html>