[cisco-voip] SRST for UCCX CTI Route Points

[Erick Wellnitz]

I think you should be able to add translations or number expansion from
extension to E.164 in your SRST config.

On Wed, Apr 15, 2015 at 9:53 AM, Armstrong, Michael <
Michael.Armstrong at cccs.edu> wrote:

>  Hello,
>
>
>
> Any ideas for an SRST configuration for a WAN outage that is preventing
> calls to a UCCX CTI Route Point? Calls to the RP are fine via the attached
> PRI’s but calls via the WAN cannot see the route point.
>
>
>
> *Michael Armstrong* | Sr. Unified Communications Admin | *Colorado
> Community College System* |
>
> P:720.858.2882 | C:720.891.6010
>
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20150415/1528903f/attachment.html>