[cisco-voip] CUCM 10.5 MoH

[Brian Meade]

Even if you could somehow convert the stream to unicast, you would still
have the issue of having to update the SDP info.

On Tue, Apr 21, 2015 at 9:36 AM, Mark Holloway <mh at markholloway.com> wrote:

> Has anyone else heard rumors that Fixed Audio Source may get Unicast
> support again at some point with CUCM 11?  I’ve got a handful of customers
> with SIP Trunks and cannot stream MoH to their SIP Trunk provider because
> the stream needs to be Unicast. They are not using CUBE as the SBC. I don’t
> suppose there is any way to use a router to convert the stream to Unicast
> before it hits the SBC?
>
>
> On Apr 13, 2015, at 4:42 PM, Brian Meade <bmeade90 at vt.edu> wrote:
>
> Are you just talking about for fixed audio source?
>
> On Mon, Apr 13, 2015 at 4:07 PM, Mark Holloway <mh at markholloway.com>
> wrote:
>
>> Are there any plans for Cisco to allow (bring back) Unicast MoH on 10.5?
>> If trunking CUCM to a non-Cisco device there are cases where MoH breaks
>> because not every endpoint will support Multicast.
>>
>> Thanks,
>> Mark
>>
>>
>> _______________________________________________
>> cisco-voip mailing list
>> cisco-voip at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20150421/b7834ac0/attachment.html>