[cisco-voip] route to two dial peers simultaneously in ios voice gateway

[Ryan Huff]

You may try a hunt group/broadcast and put both DNs in seperate partitions.

Thanks,

Ryan

-------- Original Message --------
From: Jacky Cai <jackycxh at gmail.com>
Sent: Saturday, August 15, 2015 09:49 PM
To: VOIP Group <cisco-voip at puck.nether.net>
Subject: [cisco-voip] route to two dial peers simultaneously in ios voice	gateway

>Is there any configuration which can route a call to two dial peers
>simultaneously in IOS voice gateway?
>
>I have a CUCM cluster and another IP PBX system. each user have an endpoint
>in each system. the two endpoints has the same extension number. a cisco
>IOS voice gateway is working for both systems for PSTN access. Now it is
>required that when a call comes in from PSTN to the voice gateway, two
>endpoints in both systems can be ringing simultaneously. i have two voip
>dial peers in the voice gateway to route the calls to two systems. but with
>the current configuration, only one endpoint is ringing unless the first
>system failure.
>Knowing that the "remote destination" feature in CUCM can make both
>endpoint ringing simultaneously. just wondering if there is a way in voice
>gateway can achieve this.
>the voice gateway is running on H323.
>
>Thank you.
>
>Jacky Cai
>
>_______________________________________________
>cisco-voip mailing list
>cisco-voip at puck.nether.net
>https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20150817/418d17e2/attachment.html>