[cisco-voip] Subject: Re: configure Transcoders in AS5400XM router...

[Mudassar M]

Thanks Steve. that clear off the idea of using this platform for xcoding. 
 


     On Tuesday, August 18, 2015 1:15 PM, Steve Siltman <steve.siltman at assurant.com> wrote:
   

 The 5400's doesn't support DSPFarm profiles of any kind.  Although, I was able to configure Transcoders and MTP profiles but had a load of issues.  TAC case opened which gave me the good news on these 5400's.

We use 5400's for most of our incoming call center environment and have had to work around these limitations.

Also doesn't support multicast.  I have to use unicast MOH from CUCM for all of these incoming customer calls.

Thanks,

Steve


**********************************************************************
This e-mail message and all attachments transmitted with it may contain legally privileged and/or confidential information intended solely for the use of the addressee(s). If the reader of this message is not the intended recipient, you are hereby notified that any reading, dissemination, distribution, copying, forwarding or other use of this message or its attachments is strictly prohibited. If you have received this message in error, please notify the sender immediately and delete this message and all copies and backups thereof. Thank you.
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip


  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20150818/9f97da99/attachment.html>