[cisco-voip] 3905 dial tone problem

[Angel Roberto Castaneda]

I spent quite some time troubleshooting a similar issue on a 7945 a few
years back. It ended up being a faulty handset cable.

*Angel Roberto Castaneda*

On Thu, Aug 20, 2015 at 5:28 PM, Jason Aarons (AM) <
jason.aarons at dimensiondata.com> wrote:

> 3905 registered to CME, when you pick up a headset, the dial tone begins.
> But it seems to skip like an old record, it buzzes and pauses.
>
>
>
> Not finding a bug, customer didn’t tell me load or CME version etc.
>
>
>
> I’m thinking this is a load problem as you haven’t even dialed yet.
>
>
>
>
>
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20150820/9d69789d/attachment.html>