[cisco-voip] SNR / RDP without a registered endpoint

Lelio Fulgenzi lelio at uoguelph.ca
Tue Dec 8 10:01:44 EST 2015


I did this before in v7. Haven't confirmed in v9. 

Worked as expected. Without the registered phone you (obviously) lose the ability to control the flow of calls (mobility soft keys), but you likely don't need that. 

The instructions and documentation always have it paired with a hard phone so that's likely the supported way. Which means, something might change in the future that breaks an SNR without a hard phone setup. 


Sent from my iPhone

> On Dec 8, 2015, at 9:44 AM, joel <joel.davila at gmail.com> wrote:
> 
> Looking to setup an RDP solution for some users that do not have IP phones and curious if this could be done without having an actual registered IP phone.
> 
> 
> 
> -- 
> Joel 
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip


More information about the cisco-voip mailing list