[cisco-voip] SNR / RDP without a registered endpoint

[Roger Wiklund]

We are running this on all releases from 6 up to 11, it works fine.

It's very common in Sweden to only have a mobile phone (Mobile
Extension) and dial via the PBX.

On Tue, Dec 8, 2015 at 4:01 PM, Lelio Fulgenzi <lelio at uoguelph.ca> wrote:
>
> I did this before in v7. Haven't confirmed in v9.
>
> Worked as expected. Without the registered phone you (obviously) lose the ability to control the flow of calls (mobility soft keys), but you likely don't need that.
>
> The instructions and documentation always have it paired with a hard phone so that's likely the supported way. Which means, something might change in the future that breaks an SNR without a hard phone setup.
>
>
> Sent from my iPhone
>
>> On Dec 8, 2015, at 9:44 AM, joel <joel.davila at gmail.com> wrote:
>>
>> Looking to setup an RDP solution for some users that do not have IP phones and curious if this could be done without having an actual registered IP phone.
>>
>>
>>
>> --
>> Joel
>> _______________________________________________
>> cisco-voip mailing list
>> cisco-voip at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-voip
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip