[cisco-voip] Filtering out specific number from Jabber

[Matthew Collins]

Hi Ryan,

I was under the impression that you could only manipulate feild mappings when using BDI or EDI, I didn't think that you could with UDS.

I'll give it a test.

Regards

Matthew Collins


From: Ryan Huff [mailto:ryanhuff at outlook.com]
Sent: 22 December 2015 13:02
To: Matthew Collins <mcollins at block.co.uk>
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] Filtering out specific number from Jabber

Hey Matthew,

You cannot remove the presence of the field from the Jabber client (i.e hide), but you can control the value of the field via jabber-config.xml. So while "home phone" displays in the client, you could map it to another (blank) field.

Check out the Jabber xml generator if you have not already,

https://supportforums.cisco.com/document/106926/jabber-config-file-generator

Thanks,

Ryan



Sent from my iPad
On Dec 22, 2015, at 6:54 AM, Matthew Collins <mcollins at block.co.uk<mailto:mcollins at block.co.uk>> wrote:
Hi All,

Is there a way to filter out specify AD fields that the CUCM imports from AD, For Example AD contains Home telephone and we want to keep that in there as other applications need it but we don't want it to appear in the CUCM end users contact from either the phone or Jabber.

I know for Jabber we could use EDS/BDS and map the fields to null but we want to stick with UDS for Jabber so the users have the same experience internally and via edge.


Thanks in advance Matt
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>
https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20151222/afd91ed3/attachment.html>