[cisco-voip] easiest and quickest way to disable a PRI PSTN (MGCP) port?

[Matthew Loraditch]

Just shut down the controller.
Controller t1 x/x/x
Shutdown


Matthew G. Loraditch – CCNP-Voice, CCNA-R&S, CCDA
Network Engineer
Direct Voice: 443.541.1518

Facebook<https://www.facebook.com/heliontech?ref=hl> | Twitter<https://twitter.com/HelionTech> | LinkedIn<https://www.linkedin.com/company/helion-technologies?trk=top_nav_home> | G+<https://plus.google.com/+Heliontechnologies/posts>

From: cisco-voip [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Lelio Fulgenzi
Sent: Tuesday, February 03, 2015 9:42 AM
To: Cisco-voip (cisco-voip at puck.nether.net)
Subject: [cisco-voip] easiest and quickest way to disable a PRI PSTN (MGCP) port?


Good morning all,

Here's hoping the snow is clearing up if that's what you had outside your home/office these last few days!

I'm looking for a quick way to disable a PRI PSTN (MGCP) port on my 3945 gateway. I need to do some tests on a gateway in my local building, but that means disabling the first outbound PSTN port on a remote gateway.

Normally I'd just unplug it, but there's just too much snow outside to make the trek. ;)

Thanks!

Lelio


---
Lelio Fulgenzi, B.A.
Senior Analyst, Network Infrastructure
Computing and Communications Services (CCS)
University of Guelph

519‐824‐4120 Ext 56354
lelio at uoguelph.ca<mailto:lelio at uoguelph.ca>
www.uoguelph.ca/ccs<http://www.uoguelph.ca/ccs>
Room 037, Animal Science and Nutrition Building
Guelph, Ontario, N1G 2W1

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20150203/87c5c045/attachment.html>