[cisco-voip] 7942 wants V 9.3

[Andy]

Its the firmware version, It doesn’t matter which version of CCM you are using.
You need to download it from cisco and install it on the TFTP servers or all the servers in the cluster its your choice.
If your Publisher is a tuft server and you install the new firmware it will change the device defaults, you might want to take a note of the old version, just so you don’t have a mass upgrade if a bunch of handsets reboot.

I must admit I hard code the firmware I want to use in the device config, then it doesn’t matter what the device defaults are.


Andy
andy.carse at gmail.com



> On 24 Feb 2015, at 15:17, David Zhars <dzhars at gmail.com> wrote:
> 
> I don't have the phone in front of me right now, but I got a new 7942 for a client.  Went to install it, and it would come up but with the wrong configuration.  The side of the box said something like "requires V 9.3" or 9.1, I forget which.  Is the UCM version, or the TFTP image version?
> The customer runs an 8.0 UCM setup.
> 
> Dave
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip