[cisco-voip] 7942 wants V 9.3

[Andy]

I must remember to read the emails before sending.

> "is a tuft server” 

should read “is a TFTP Server"

Andy
andy.carse at gmail.com



> On 24 Feb 2015, at 15:30, Andy <andy.carse at gmail.com> wrote:
> 
> Its the firmware version, It doesn’t matter which version of CCM you are using.
> You need to download it from cisco and install it on the TFTP servers or all the servers in the cluster its your choice.
> If your Publisher is a tuft server and you install the new firmware it will change the device defaults, you might want to take a note of the old version, just so you don’t have a mass upgrade if a bunch of handsets reboot.
> 
> I must admit I hard code the firmware I want to use in the device config, then it doesn’t matter what the device defaults are.
> 
> 
> Andy
> andy.carse at gmail.com
> 
> 
> 
>> On 24 Feb 2015, at 15:17, David Zhars <dzhars at gmail.com> wrote:
>> 
>> I don't have the phone in front of me right now, but I got a new 7942 for a client.  Went to install it, and it would come up but with the wrong configuration.  The side of the box said something like "requires V 9.3" or 9.1, I forget which.  Is the UCM version, or the TFTP image version?
>> The customer runs an 8.0 UCM setup.
>> 
>> Dave
>> _______________________________________________
>> cisco-voip mailing list
>> cisco-voip at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-voip
>