[cisco-voip] strange t1 issue

[Ryan Huff]

Doing a PRI migration from a 2811 vwic2 T1 to a 2911 vwic3 T1

I can get the D Channel (Serial 0/1/0:23) to come up but I can't get the B channels to come up. The 

Only thing in the logs are:

%MARS_NETCLK-3-CLK_TRANS: Network clock source transitioned from priority 10 to priority 1
: %LINK-3-UPDOWN: Interface Serial0/1/0:23, changed state to up
: %MARS_NETCLK-3-CLK_TRANS: Network clock source transitioned from priority 1 to priority 10
: %LINK-3-UPDOWN: Interface Serial0/1/0:23, changed state to down
: %MARS_NETCLK-3-CLK_TRANS: Network clock source transitioned from priority 10 to priority 1
: %LINK-3-UPDOWN: Interface Serial0/1/0:23, changed state to up

Every so often it repeats. Any ideas

thanks,

ryan

 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20150225/e51b630a/attachment.html>