[cisco-voip] VG 224 %FLEXDSPRM-5-OUT_OF_RESOURCES

[Scott Voll]

also:

sh voic dsp gr all
DSP groups on slot 0:
dsp 1:
  State: FAIL, firmware: 0.0.0
  Max signal/voice channel: 16/16
  Max credits: 240
  num_of_sig_chnls_allocated: 0
  Transcoding channels allocated: 0
  Group: FLEX_GROUP_VOICE, complexity: FLEX
    Shared credits: 240, reserved credits: 0
    Signaling channels allocated: 0
    Voice channels allocated: 0
    Credits used (rounded-up): 0

dsp 2:
  State: FAIL, firmware: 0.0.0
  Max signal/voice channel: 16/16
  Max credits: 240
  num_of_sig_chnls_allocated: 0
  Transcoding channels allocated: 0
  Group: FLEX_GROUP_VOICE, complexity: FLEX
    Shared credits: 240, reserved credits: 0
    Signaling channels allocated: 0
    Voice channels allocated: 0
    Credits used (rounded-up): 0

dsp 3:
  State: FAIL, firmware: 0.0.0
  Max signal/voice channel: 16/16
  Max credits: 240
  num_of_sig_chnls_allocated: 0
  Transcoding channels allocated: 0
  Group: FLEX_GROUP_VOICE, complexity: FLEX
    Shared credits: 240, reserved credits: 0
    Signaling channels allocated: 0
    Voice channels allocated: 0
    Credits used (rounded-up): 0


  20 DSP resource allocation failure

this is after Rebooting the VG.

Thanks

Scott


On Fri, Jan 9, 2015 at 9:04 AM, Scott Voll <svoll.voip at gmail.com> wrote:

> How do I trouble shoot a remote VG224 that is showing
>
> 1/9/2015 8:43 AM : FLEXDSPRM-5-OUT_OF_RESOURCES  119: *Mar  1
> 00:05:14.609: %FLEXDSPRM-5-OUT_OF_RESOURCES: No dsps found either locally
> or globally.
>
>
> If I understand the syslog message I would say that the DSP's died.  Would
> that be correct?  I just have to replace it?
>
> IOS is vg224-i6k9s-mz.151-3.T2.bin
>
>
> TIA
>
>
> Scott
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20150109/de734825/attachment.html>