[cisco-voip] when would you use CTI Remote Device with Jabber?

[Jason Aarons (AM)]

Jabber (identical to CUPC) can control your 7965 desktop phone.  So you can enter number and press dial and the phone can go off hook and dial number.

I think this is what your referencing by CTI Remote Device.

From: cisco-voip [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Lelio Fulgenzi
Sent: Friday, June 5, 2015 3:47 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] when would you use CTI Remote Device with Jabber?



Just reading through some more documentation and am a little confused about when you would use CTI Remote Device with Jabber.

It looks like you would use it for something like a PSTN phone at home when the voip quality is not as good as you'd like.

For things like ringing the cellphone itself when Jabber unregisters or for handoff, I'm guessing I'm still using single number reach or whatever the Jabber equivalent is?


---
Lelio Fulgenzi, B.A.
Senior Analyst, Network Infrastructure
Computing and Communications Services (CCS)
University of Guelph

519‐824‐4120 Ext 56354
lelio at uoguelph.ca<mailto:lelio at uoguelph.ca>
www.uoguelph.ca/ccs<http://www.uoguelph.ca/ccs>
Room 037, Animal Science and Nutrition Building
Guelph, Ontario, N1G 2W1



itevomcid
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20150607/2e9788d0/attachment.html>