[cisco-voip] UCCX 10.6 | CUCM 10.5.2 | CAD Extension out of service

[Ryan Huff]

Hi Justin, thank you for your reply.

CUCM 10.5.2su1 is in the active partition on all nodes (10.5.2.11900-3). 

LRO is interesting; my elastic sky version is 5.5 and according to the DocWiki (http://docwiki.cisco.com/wiki/Disable_LRO) it seems to only be an issue with 4.1 and more specifically, with CUCM < 8.6 with ESXi 4.1. I've also seen several UC evangelical sites proclaim that LRO needs to be disabled where ever Virtual Cisco UC runs, versions be damned.

I'm in pre-flight, so now is definitely the time to power down and knock LRO off.

I guess I am more interested in the why at this point (plight of an engineer). I suppose this issue (if it is even an issue) will self-heal itself in v11 when CAD is no longer an option, but still plenty of need to support existing CAD.

This is the first time I used this version mix (UCCX 10.6 | CUCM 10.5.2su1 | CAD), and I haven't ran into this issue before.

Thanks for any thoughts you put into this.

-Ryan


Date: Tue, 9 Jun 2015 07:41:46 -0400
Subject: Re: [cisco-voip] UCCX 10.6 | CUCM 10.5.2 | CAD Extension out of service
From: jsteinberg at gmail.com
To: ryanhuff at outlook.com
CC: cisco-voip at puck.nether.net

Are you on UCM 10.5.2su1 ?   I haven't seen that issue at all.
Is your VMware LRO disabled ?
Do your UCMs have one or two vCPU ?
On Jun 9, 2015 12:42 AM, "Ryan Huff" <ryanhuff at outlook.com> wrote:



Has anyone been noticing that in this environment (UCCX 10.6 | CUCM 10.5.2 | CAD); extensions will sometimes report as OutOfService (and subsequently cause CAD login issues) when in fact, the phone is registered, associated to the jTAPI/RMCMSubsys user, has CTI Control enabled (and is setup correctly in all other respects)?

What seems to resolve this issue for me; is to super copy the phone to a fake mac address, delete the original and then re-mac the newly created device. Doing a cluster reboot seems to address this as well.

This is a new 2 cluster build. Everything about the phone seems to function fine within call manager when CAD is having a login issue. I've changed the addressing mode on the phone (and CTI ports) to ipv4 only, turned JAL off on the phone. Just really odd and not very easy to define.

I know CAD is near death and Finesse is the future, but I have to support CAD in this scenario.

Thanks,

Ryan
 		 	   		  

_______________________________________________

cisco-voip mailing list

cisco-voip at puck.nether.net

https://puck.nether.net/mailman/listinfo/cisco-voip


 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20150609/3ec858fc/attachment.html>