[cisco-voip] Interesting off hook dial delay

[Anthony Holloway]

Believe it or not, even Called and Calling Party Transformations are
considered for digit analysis. I know this from a strange secondary dial
tone issue I was having. A good guess on your part for sure.

I don't know of any other way than manually looking at patterns to find the
culprit. Good luck.

On Wed, Jun 10, 2015 at 6:19 AM Walenta, Philip <Philip.Walenta at polycom.com>
wrote:

> Route patterns, translation patterns also clean?  There are so many places
> digits can hide these days.
>
>
>
> *From:* Ryan Huff [mailto:ryanhuff at outlook.com]
> *Sent:* Wednesday, June 10, 2015 8:17 AM
> *To:* Walenta, Philip; cisco-voip at puck.nether.net
>
>
> *Subject:* RE: [cisco-voip] Interesting off hook dial delay
>
>
>
> That is what I was thinking .... fairly small system so all the
> patterns/xlates and everything fit on one page. I don't see any unassigned
> DNs ... etc.
>
> Good thoughts Phillip! I'll keep looking.
>
> -ryan
> ------------------------------
>
> From: Philip.Walenta at Polycom.com
> To: ryanhuff at outlook.com; cisco-voip at puck.nether.net
> Date: Wed, 10 Jun 2015 06:05:38 -0700
> Subject: RE: [cisco-voip] Interesting off hook dial delay
>
> Is this potentially matching something in the “none” partition?
>
>
>
> *From:* cisco-voip [mailto:cisco-voip-bounces at puck.nether.net
> <cisco-voip-bounces at puck.nether.net>] *On Behalf Of *Ryan Huff
> *Sent:* Wednesday, June 10, 2015 7:48 AM
> *To:* cisco-voip at puck.nether.net
> *Subject:* [cisco-voip] Interesting off hook dial delay
>
>
>
> Experiencing some strange off-hook delay when dialing.
>
> Here are the tests I did:
>
> When dialing an exact match (another DN) from the off-hook position, I get
> a full T302 delay before the digits are sent. If however, I mark the target
> DN as urgent priority, it routes immediately (as I would expect).
>
> I've done some additional testing and placed 2 single DNs in a new PT/CSS
> and I get the same off-hook delay. If I dial the digits and send EnBloc
> with the dial softkey, everything works fine.
>
> When trying to transfer a connected call to a third caller, the secondary
> transfer button and the target line description do not appear until the
> delay passes and the phone rings
>
> I've used DNA and it isn't showing me anything unexpected; save this was a
> perfectly working system a few days ago.
>
> I've tried a cluster reboot, and that didn't change the condition. It
> sounds like signaling delay except for the fact the I can override the
> issue with Urgent Priority, if it were signaling delay nothing would
> override it. So I am left with inter-digit timeout but can't see where it
> could be coming from, especially with a new PT/CSS that only has 2 DNs in
> it.
>
> Thanks,
>
> Ryan
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20150610/ef766f7d/attachment.html>