[cisco-voip] BAT and the VG310...

[Jonathan Charles]

I am doing SCCP... so how should it be formed?

On Mon, Jun 15, 2015 at 7:45 AM, Charles Goldsmith <wokka at justfamily.org>
wrote:

> Not with MGCP
>
> Sent via C=64 Mobile
>
> On Jun 15, 2015, at 12:09 AM, Jonathan Charles <jonvoip at gmail.com> wrote:
>
> So, for Domain Name, did you not specify the SKIGWXXXXXXX or just the last
> 10 of the MAC?
>
>
> Jonathan
>
> On Mon, Jun 15, 2015 at 12:00 AM, Charles Goldsmith <wokka at justfamily.org>
> wrote:
>
>> Jonathan, here is the csv I've used recently with a MGCP vg310.  Just
>> like a 224, I create the gateway template and setup the first port with a
>> line template.
>>
>> I did this recently on a 10.5.2 system with no issues.
>>
>> Let me know if you have any questions.
>>
>>
>> On Sun, Jun 14, 2015 at 10:58 PM, Jonathan Charles <jonvoip at gmail.com>
>> wrote:
>>
>>> Tried BATing a VG310 in the same way we used to do a VG224 and it failed
>>> like crazy...it installs the first one, then errors out saying the domain
>>> name already exists...
>>>
>>> I used the BAT template with 10.5.2-11900 and used the tab for the
>>> VG310s.
>>>
>>> I tried adding the VG310 first and not, each time it fails... or just
>>> adds the first port 0...
>>>
>>> Any ideas?
>>>
>>>
>>> Jonathan
>>>
>>>
>>>
>>> _______________________________________________
>>> cisco-voip mailing list
>>> cisco-voip at puck.nether.net
>>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>>
>>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20150615/02ea29fa/attachment.html>