[cisco-voip] BAT and the VG310...

[Jason Aarons (AM)]

It might be better to configure 1 manually, do an Export then modify and import.   However that might fail too ☺

From: cisco-voip [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Jonathan Charles
Sent: Monday, June 15, 2015 9:40 AM
To: Charles Goldsmith; cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] BAT and the VG310...


I am doing SCCP... so how should it be formed?

On Mon, Jun 15, 2015 at 7:45 AM, Charles Goldsmith <wokka at justfamily.org<mailto:wokka at justfamily.org>> wrote:
Not with MGCP

Sent via C=64 Mobile

On Jun 15, 2015, at 12:09 AM, Jonathan Charles <jonvoip at gmail.com<mailto:jonvoip at gmail.com>> wrote:
So, for Domain Name, did you not specify the SKIGWXXXXXXX or just the last 10 of the MAC?


Jonathan

On Mon, Jun 15, 2015 at 12:00 AM, Charles Goldsmith <wokka at justfamily.org<mailto:wokka at justfamily.org>> wrote:
Jonathan, here is the csv I've used recently with a MGCP vg310.  Just like a 224, I create the gateway template and setup the first port with a line template.

I did this recently on a 10.5.2 system with no issues.

Let me know if you have any questions.


On Sun, Jun 14, 2015 at 10:58 PM, Jonathan Charles <jonvoip at gmail.com<mailto:jonvoip at gmail.com>> wrote:
Tried BATing a VG310 in the same way we used to do a VG224 and it failed like crazy...it installs the first one, then errors out saying the domain name already exists...

I used the BAT template with 10.5.2-11900 and used the tab for the VG310s.

I tried adding the VG310 first and not, each time it fails... or just adds the first port 0...

Any ideas?


Jonathan



_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>
https://puck.nether.net/mailman/listinfo/cisco-voip





itevomcid
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20150615/b33e2dff/attachment.html>