[cisco-voip] BAT and the VG310...

[Charles Goldsmith]

I'm not sure Jonathan, I have not done SCCP on a VG310, I would assume it
would be the same as a 224, but you know what that gets you (assuming).

On Mon, Jun 15, 2015 at 8:39 AM, Jonathan Charles <jonvoip at gmail.com> wrote:

> I am doing SCCP... so how should it be formed?
>
> On Mon, Jun 15, 2015 at 7:45 AM, Charles Goldsmith <wokka at justfamily.org>
> wrote:
>
>> Not with MGCP
>>
>> Sent via C=64 Mobile
>>
>> On Jun 15, 2015, at 12:09 AM, Jonathan Charles <jonvoip at gmail.com> wrote:
>>
>> So, for Domain Name, did you not specify the SKIGWXXXXXXX or just the
>> last 10 of the MAC?
>>
>>
>> Jonathan
>>
>> On Mon, Jun 15, 2015 at 12:00 AM, Charles Goldsmith <wokka at justfamily.org
>> > wrote:
>>
>>> Jonathan, here is the csv I've used recently with a MGCP vg310.  Just
>>> like a 224, I create the gateway template and setup the first port with a
>>> line template.
>>>
>>> I did this recently on a 10.5.2 system with no issues.
>>>
>>> Let me know if you have any questions.
>>>
>>>
>>> On Sun, Jun 14, 2015 at 10:58 PM, Jonathan Charles <jonvoip at gmail.com>
>>> wrote:
>>>
>>>> Tried BATing a VG310 in the same way we used to do a VG224 and it
>>>> failed like crazy...it installs the first one, then errors out saying the
>>>> domain name already exists...
>>>>
>>>> I used the BAT template with 10.5.2-11900 and used the tab for the
>>>> VG310s.
>>>>
>>>> I tried adding the VG310 first and not, each time it fails... or just
>>>> adds the first port 0...
>>>>
>>>> Any ideas?
>>>>
>>>>
>>>> Jonathan
>>>>
>>>>
>>>>
>>>> _______________________________________________
>>>> cisco-voip mailing list
>>>> cisco-voip at puck.nether.net
>>>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>>>
>>>>
>>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20150615/35ab5254/attachment.html>