[cisco-voip] Mixed mode revert to unsecure

[Brian Meade]

You just need to run "utils ctl set-cluster non-secure-mode" on the
publisher, then run "file delete tftp CTLFile.tlv" on each node (may not be
needed, can't remember), then restart Cisco CallManager service and Cisco
TFTP service on each node.

Then you'll be able to re-configure auto-registration.

On Wed, Jun 24, 2015 at 2:57 AM, Alessandro Bertacco <
bertacco.alessandro at alice.it> wrote:

> Hi guys, for mistake I have enabled my 10.5 cucm in mixed mode using Cli
> command and with out using the token.
> Customer don't have any capf profile defined and no one use encryption,
> but obviously auto registration now is disabled, and for sure I've many
> other complications not needed.
>
> Can I easily revert back to Unsecure mode?
>
> Thanks.
>
> Alessandro
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20150624/bd501918/attachment.html>