[cisco-voip] R: Mixed mode revert to unsecure

[Alessandro Bertacco]

Hi Brian, and thank you very much, I will do that tomorrow night.

 

Last question, have you tried that revert before, and did you note some strange behaviour after rebooting server, or all works fine?

 

Thank you regards

 

Alessandro

 

Da: bmeade90 at gmail.com [mailto:bmeade90 at gmail.com] Per conto di Brian Meade
Inviato: mercoledì 24 giugno 2015 16:34
A: Alessandro Bertacco
Cc: cisco-voip at puck.nether.net
Oggetto: Re: [cisco-voip] Mixed mode revert to unsecure

 

You just need to run "utils ctl set-cluster non-secure-mode" on the publisher, then run "file delete tftp CTLFile.tlv" on each node (may not be needed, can't remember), then restart Cisco CallManager service and Cisco TFTP service on each node.

 

Then you'll be able to re-configure auto-registration.

 

On Wed, Jun 24, 2015 at 2:57 AM, Alessandro Bertacco <bertacco.alessandro at alice.it <mailto:bertacco.alessandro at alice.it> > wrote:

Hi guys, for mistake I have enabled my 10.5 cucm in mixed mode using Cli command and with out using the token.
Customer don't have any capf profile defined and no one use encryption, but obviously auto registration now is disabled, and for sure I've many other complications not needed.

Can I easily revert back to Unsecure mode?

Thanks.

Alessandro 


_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net <mailto:cisco-voip at puck.nether.net> 
https://puck.nether.net/mailman/listinfo/cisco-voip

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20150624/827147e2/attachment.html>