[cisco-voip] errors with IOS transcoder

[Brian Meade]

Shouldn't need the card in there.  Do you have "dsp services dspfarm" under
the voice-card config?

On Tue, Mar 3, 2015 at 12:07 PM, Barry Howser <bhowser5050 at gmail.com> wrote:

> I am getting ready to add a VWIC3 T1 (and PRI) to my 2900 series ISR
> router running 15.3(2) and I'm trying to configure an IOS transcoder, I
> have PVDM3-64 (2 32 modules). When I get into the transcode sub
> configuration it gives me an "Unrecognised Command" error when trying to
> preference the codecs. What I am doing wrong?
>
> router(config)#dspfarm profile 6 transcode
> router(config-dspfarm-profile)#codec ?
> % Unrecognized command
> router(config-dspfarm-profile)#codec
>
> I've been reading that I may need to actually have the T1 card in the
> router first but I can't find anything to confirm that. I've been reading
> here:
> http://www.cisco.com/c/en/us/td/docs/ios-xml/ios/voice/cminterop/configuration/15-mt/dia-15-mt-book/vc-enh-confr-vgr.html#GUID-2E7DACC4-090A-4E89-BC1B-006E79BF0BC0
> which seems to suggest that PVDM3 might not be able to support transcoding?
>
> Can anyone shed a little light my way?
>
> thank you
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20150303/612a2df3/attachment.html>