[cisco-voip] ATA190 Plar SIP Dial Rule

[Brian Meade]

For the SIP Dial Rule, all you want it to have is a PLAR with Button 1
set.  Don't enter the number you want to PLAR to.  Then just set up PLAR
like you would for a SCCP phone with a new CSS/partition/blank translation
pattern.

On Fri, Mar 13, 2015 at 3:30 PM, Barry Howser <bhowser5050 at gmail.com> wrote:

> Hello everyone.
>
> I have an ATA190 that needs to do a plar to 911. My dial plan uses "9" to
> access an outside line (including the 911 pattern).
>
> I created a SIP dial rule and added a plar pattern. I added a parameter
> called "911" in the description and then added 9911 in the value field. I
> saved, applied config and restarted.
>
> I have applied that SIP Dial Rule to the ATA190 device's sip dial rule
> section and reset the ATA. When I take either of the lines off hook with an
> analog phone, I just get dial tone .... no PLARing.
>
> What am I doing wrong?
>
> thanks
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20150313/70afc4a4/attachment.html>